EtherCAT motion modes
EtherCAT slave operation supports CiA 301 and CiA 402, with CSP, PV, PP and HM modes for position, velocity and homing tasks on a single axis.
High torsional rigidity and constant torsional backlash over the entire gearbox service life ensure consistently high performance
High torque density thanks to high performance and short design
Highest quality standards for a long service life and extended maintenance intervals
The SPXC1-57E EtherCAT closed loop stepper driver provides a 0.7–4.8 A output-current range and a built-in single-axis controller. Use CSP, PV, PP or HM operation and configure current, microstep and standstill-current settings through communication.
EtherCAT slave operation supports CiA 301 and CiA 402, with CSP, PV, PP and HM modes for position, velocity and homing tasks on a single axis.
Three optically isolated programmable inputs provide configurable functions including home, positive and negative limits, emergency-stop input and probe input.
A 32-bit RISC-V MCU supports the drive architecture. Configure drive current, microstep settings and standstill current through EtherCAT or serial communication.
Match the motor winding, current and feedback requirements to the drive, then verify the EtherCAT master configuration, signal assignments and installation space. Motor frame designation alone does not establish compatibility.
| Parameter | Specification |
|---|---|
| Supply voltage | 24–50 VDC |
| Output current | 0.7–4.8 A |
| Listed motor frames | 20 / 28 / 42 / 57 / 60; verify motor electrical and installation requirements |
| Listed input functions | Home, positive limit, negative limit, emergency-stop input, probe and STO input |
| Output functions | Alarm, in-position, Z-phase, motor-enable and user-defined output |
| Function | Specification |
|---|---|
| Drive architecture | Standalone single-axis closed-loop stepper driver |
| Processor | 32-bit RISC-V MCU |
| Network interface | EtherCAT slave |
| Supported profiles | CiA 301 and CiA 402 |
| Operating modes | CSP / PV / PP / HM |
| Single-axis controller | Built in; synchronous position, velocity, position and homing modes |
| Programmable inputs | 3 optically isolated inputs |
| Drive configuration | Current, microstep and standstill-current settings via EtherCAT or serial communication |
The listed input and output functions do not establish physical channel counts or safety performance. Confirm electrical ratings, wiring and the STO implementation before integration. A safety-rated stop function requires appropriate system design and safety documentation.
Confirm dimension units, mounting-hole positions and connector clearance before machining the installation plate.
SPXC1-57E keeps the driver separate from the motor and combines EtherCAT communication with a built-in single-axis controller. Match the 24–50 VDC supply and 0.7–4.8 A output range to the motor, then configure the selected motion mode and signal functions.

Evaluate the available operating modes and programmable signals against the machine sequence. Confirm master configuration, motor matching and required stop behavior before commissioning.
Assess CSP or PP operation for the required position-command sequence and EtherCAT master configuration.
Review PV operation against the commanded speed sequence and the motor’s operating requirements.
Combine HM operation with the selected home and limit-input assignments for axis referencing.
Allocate the three programmable inputs to the required home, limit, emergency-stop or probe functions.
Share the motor and feedback data, EtherCAT master, selected operating modes and signal requirements so our engineering team can review your single-axis drive configuration.
Send the motor model, supply voltage, EtherCAT master, operating modes and I/O requirements for selection support.
Review additional components for your machine’s motion system.
Would you like to learn more about our solutions?
We would be happy to advise you—personally, competently, and tailored to your requirements.
Short delivery times available for selected product configurations.
The TP+ HIGH TORQUE enables maximum torque density and maximum torsional rigidity—ideal for demanding applications with dynamic load changes and high positioning accuracy.
alpha Advanced Line gearboxes with increased durability and food-grade lubrication available.
The TP+ for coordinated pinion-rack systems for medium to high requirements. Typical areas of application in wood, plastic, and composite processing, in machining centers, or in automation.
With cynapse® and smart services, you can unleash the full potential of your drive system: sensor data is processed, visualized, and analyzed intelligently. Find out how the combination of gearboxes with cynapse® and our Smart Services can make your digital production faster, safer, and more efficient.