SPBPO872 Pulse-Controlled Open-Loop Stepper Driver

Pulse & Direction Driver
SPBPO872 is a separate open loop stepper driver with a 20–80 VAC or 30–110 VDC supply range and 2.4–7.2 A peak output current. It offers eight current settings, 16 microstep settings and pulse-and-direction control at up to 200 kHz.
SPBPO872 open loop stepper driver with pulse-and-direction control

Positioning accuracy

High torsional rigidity and constant torsional backlash over the entire gearbox service life ensure consistently high performance

Compactness

High torque density thanks to high performance and short design

Low maintenance

Highest quality standards for a long service life and extended maintenance intervals

Technical data

Pulse-controlled motion

AC or DC supply. Dedicated pulse control.

The SPBPO872 open loop stepper driver combines eight current settings with 16 microstep settings and a dedicated pulse-and-direction interface. It accepts a 20–80 VAC or 30–110 VDC supply for integration into a separate-driver motion system.

Selectable drive settings

Eight output-current settings span 2.4–7.2 A peak. Select the current and one of 16 microstep settings to suit the motor and motion requirement.

Pulse-and-direction control

The pulse input supports frequencies up to 200 kHz. Dedicated PUL, DIR and ENA terminals provide pulse, direction and enable connections.

AC or DC power input

The supply ranges are 20–80 VAC and 30–110 VDC. Control-signal terminals are separate from the motor outputs and power input.

Engineering information

Technical data

Check the supply range, output-current setting and pulse interface against the motor and controller before selecting the SPBPO872.

20–80 VAC
30–110 VDC
Supply voltage
2.4–7.2 A peakOutput current
200 kHzMaximum pulse frequency
16 settingsMicrostep selection
Electrical

Electrical operating parameters

SPBPO872 electrical operating parameters
Parameter Unit Minimum Typical Maximum
Output current A peak 2.4 — 7.2
AC input supply voltage VAC 20 60 80
DC input supply voltage VDC 30 48 / 60 110
Logic input current mA 7 10 16
Step-pulse frequency kHz 0 — 200
Insulation resistance MΩ 500 — —
Configuration

Drive and control functions

SPBPO872 drive and control functions
Function Specification
Control architecture Separate, open-loop stepper driver
Current selection 8 selectable settings
Microstep selection 16 selectable settings
Command interface Pulse & Direction
Signal connections Separate control-signal terminals
Interfaces

Terminal identification

SPBPO872 terminal markings
Group Terminal markings
Direction input DIR- / DIR+
Pulse input PUL- / PUL+
Enable input ENA- / ENA+
Motor connection A+ / A- / B+ / B-
Power input AC / AC
Current settings

Output-current selection

SW4: OFF = Half current; ON = Full current.

SPBPO872 output-current switch settings
Peak current (A) SW1 SW2 SW3
2.40 ON ON ON
3.08 OFF ON ON
3.77 ON OFF ON
4.45 OFF OFF ON
5.14 ON ON OFF
5.83 OFF ON OFF
6.52 ON OFF OFF
7.20 OFF OFF OFF
Microstep settings

Pulse/revolution selection

SPBPO872 pulse per revolution switch settings
Pulses/revolution SW5 SW6 SW7 SW8
400 ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
1000 ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
10000 OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Confirm the controller’s signal levels and input-current requirements before connection. For DC operation, confirm the correct wiring of the terminals marked AC / AC before applying power.

SPBPO872 stepper driver mechanical outline and mounting dimensions
Mechanical outline and mounting dimensions

Confirm the dimension units, mounting interface and terminal clearance before machining the installation plate.

Separate drive architecture

Pulse commands. Selectable drive settings.

SPBPO872 provides a separate open-loop drive stage for a pulse-controlled stepper axis. Match the current setting to the selected motor and confirm the controller’s pulse-and-direction interface.

  • 20–80 VAC or 30–110 VDC supply range
  • Eight output-current and 16 microstep settings
  • Pulse, direction and enable terminals; up to 200 kHz pulse input
SPBPO872 open loop stepper driver with pulse-and-direction control
Application selection

Assess the driver against your motion requirements

Use the electrical range and control functions to evaluate the driver for your machine. Motor frame size alone does not establish electrical compatibility.

01

Pulse-command axes

Check the controller’s pulse-and-direction signals and maximum operating pulse frequency.

02

Separate-driver layouts

Review enclosure space, mounting points and terminal access in the electrical layout.

03

Motor-current matching

Match the motor winding and rated phase current to an appropriate peak output-current setting.

04

Controller interfacing

Confirm the controller’s signal levels, logic input current and enable connection before integration.

System integration

Confirm the electrical and mechanical fit

Share the motor data, controller signal details and installation requirements so our engineering team can review the proposed driver configuration.

Power supply20–80 VAC / 30–110 VDC
Output-current range2.4–7.2 A peak
Pulse inputUp to 200 kHz
Command interfacePulse & Direction
Logic input current7–16 mA; 10 mA typical

Discuss your stepper-drive requirement with our engineers.

Send the motor model, rated phase current, supply voltage, pulse-command requirements and installation constraints for selection support.

Request consultation →

Contact us

Would you like to learn more about our solutions?
We would be happy to advise you—personally, competently, and tailored to your requirements.

Perfection in a new dimension

SPBPO872 Pulse-Controlled Open-Loop Stepper Driver
SPBPO872 is a separate open loop stepper driver with a 20–80 VAC or 30–110 VDC supply range and 2.4–7.2 A peak output current. It offers eight current settings, 16 microstep settings and pulse-and-direction control at up to 200 kHz.

Further Information

csm walpha vorzugsbaureihen slider 720x490 eaea48abcd

Short delivery times available for selected product configurations.

csm tp plus image 125ef722c4

The TP+ HIGH TORQUE enables maximum torque density and maximum torsional rigidity—ideal for demanding applications with dynamic load changes and high positioning accuracy.

csm tp plus mf flansch korrosion liegend slider 78e8934f42

alpha Advanced Line gearboxes with increased durability and food-grade lubrication available.

csm tp plus ma rmw ritzel zahnstange slider f4c7f6da40

The TP+ for coordinated pinion-rack systems for medium to high requirements. Typical areas of application in wood, plastic, and composite processing, in machining centers, or in automation.

csm cynapse produkseite element slider 08849abb4c

With cynapse® and smart services, you can unleash the full potential of your drive system: sensor data is processed, visualized, and analyzed intelligently. Find out how the combination of gearboxes with cynapse® and our Smart Services can make your digital production faster, safer, and more efficient.

Related products