Selectable drive settings
Three DIP switches select eight current settings. Two further DIP switches select four microstep settings, with microstep configuration also adjustable through PC software.
High torsional rigidity and constant torsional backlash over the entire gearbox service life ensure consistently high performance
High torque density thanks to high performance and short design
Highest quality standards for a long service life and extended maintenance intervals
The SPBI42PO integrated open loop stepper driver supports pulse-and-direction, dual-pulse and I/O speed control. Its 12–36 VDC supply range and 0.2–2 A output-current range provide a basis for selecting a drive for 20, 28, 35 or 42 mm motor applications.
Three DIP switches select eight current settings. Two further DIP switches select four microstep settings, with microstep configuration also adjustable through PC software.
Choose pulse-and-direction, dual-pulse or I/O speed control. Pulse operation supports input frequencies up to 200 kHz; I/O speed mode provides four preset levels within 50–220 rpm.
The driver accepts 12–36 VDC, with 24 VDC as the typical supply. Overcurrent and overvoltage protection support integration into an appropriately matched motion system.
Match the motor winding, drive current, controller signals and mounting interface before selecting the SPBI42PO. Motor frame size alone does not establish electrical or mechanical compatibility.
| Parameter | Unit | Minimum | Typical | Maximum |
|---|---|---|---|---|
| Output current | A | 0.2 | — | 2 |
| Input supply voltage | VDC | 12 | 24 | 36 |
| Logic input voltage | V | 5 | 24 | 24 |
| Logic input current | mA | 7 | 10 | 10 |
| Step-pulse frequency | kHz | 0 | — | 200 |
| Function | Specification |
|---|---|
| Drive architecture | Integrated open-loop stepper driver |
| Motor frame options | 20 / 28 / 35 / 42 mm; verify the motor and mounting configuration |
| Control modes | Pulse & direction / Dual pulse / I/O speed control |
| Current selection | 8 settings selected by 3 DIP switches |
| Microstep selection | 4 settings selected by 2 DIP switches; PC-adjustable configuration |
| I/O speed presets | 4 default speed levels within 50–220 rpm |
| Protection functions | Overcurrent and overvoltage protection |
Confirm the required control mode, signal levels and input-current requirements before connection.
Confirm the dimension units, mounting interface and connector clearance before machining the installation plate.
SPBI42PO combines selectable current and microstep settings with three control modes. Review the drive configuration against the motor, controller and mechanical installation before integration.

Evaluate the electrical range and control modes for your machine. Check the mounting arrangement individually for each 20, 28, 35 or 42 mm motor configuration.
Check pulse-and-direction or dual-pulse controller signals and the maximum operating pulse frequency.
Assess the four I/O speed presets against the required operating speed and control sequence.
Match the motor winding and current requirement to the drive’s 0.2–2 A output-current range.
Review the mounting interface, connector access and available space around the driver and motor.
Share the motor data, selected control mode and installation requirements so our engineering team can review the proposed driver configuration.
Send the motor model, current requirement, supply voltage, control mode and installation constraints for selection support.
Review additional components for your machine’s motion system.
Would you like to learn more about our solutions?
We would be happy to advise you—personally, competently, and tailored to your requirements.
Short delivery times available for selected product configurations.
The TP+ HIGH TORQUE enables maximum torque density and maximum torsional rigidity—ideal for demanding applications with dynamic load changes and high positioning accuracy.
alpha Advanced Line gearboxes with increased durability and food-grade lubrication available.
The TP+ for coordinated pinion-rack systems for medium to high requirements. Typical areas of application in wood, plastic, and composite processing, in machining centers, or in automation.
With cynapse® and smart services, you can unleash the full potential of your drive system: sensor data is processed, visualized, and analyzed intelligently. Find out how the combination of gearboxes with cynapse® and our Smart Services can make your digital production faster, safer, and more efficient.