SPBI42PO Integrated Open-Loop Stepper Driver

Pulse & Direction Driver
SPBI42PO is an integrated open loop stepper driver with a 12–36 VDC supply range and 0.2–2 A output-current range. It supports pulse-and-direction, dual-pulse and I/O speed control for 20, 28, 35 and 42 mm motor applications, subject to electrical and mounting checks.
SPBI42PO integrated open loop stepper driver with finned housing

Positioning accuracy

High torsional rigidity and constant torsional backlash over the entire gearbox service life ensure consistently high performance

Compactness

High torque density thanks to high performance and short design

Low maintenance

Highest quality standards for a long service life and extended maintenance intervals

Technical data

Integrated stepper control

Three control modes. One compact drive.

The SPBI42PO integrated open loop stepper driver supports pulse-and-direction, dual-pulse and I/O speed control. Its 12–36 VDC supply range and 0.2–2 A output-current range provide a basis for selecting a drive for 20, 28, 35 or 42 mm motor applications.

Selectable drive settings

Three DIP switches select eight current settings. Two further DIP switches select four microstep settings, with microstep configuration also adjustable through PC software.

Three control modes

Choose pulse-and-direction, dual-pulse or I/O speed control. Pulse operation supports input frequencies up to 200 kHz; I/O speed mode provides four preset levels within 50–220 rpm.

DC-powered integration

The driver accepts 12–36 VDC, with 24 VDC as the typical supply. Overcurrent and overvoltage protection support integration into an appropriately matched motion system.

Engineering information

Technical data

Match the motor winding, drive current, controller signals and mounting interface before selecting the SPBI42PO. Motor frame size alone does not establish electrical or mechanical compatibility.

12–36 VDCSupply voltage
0.2–2 AOutput current
200 kHzMaximum pulse frequency
3 modesControl selection
Electrical

Electrical operating parameters

SPBI42PO electrical operating parameters
Parameter Unit Minimum Typical Maximum
Output current A 0.2 — 2
Input supply voltage VDC 12 24 36
Logic input voltage V 5 24 24
Logic input current mA 7 10 10
Step-pulse frequency kHz 0 — 200
Configuration

Drive and control functions

SPBI42PO drive and control functions
Function Specification
Drive architecture Integrated open-loop stepper driver
Motor frame options 20 / 28 / 35 / 42 mm; verify the motor and mounting configuration
Control modes Pulse & direction / Dual pulse / I/O speed control
Current selection 8 settings selected by 3 DIP switches
Microstep selection 4 settings selected by 2 DIP switches; PC-adjustable configuration
I/O speed presets 4 default speed levels within 50–220 rpm
Protection functions Overcurrent and overvoltage protection

Confirm the required control mode, signal levels and input-current requirements before connection.

SPBI42PO integrated stepper driver mechanical outline and mounting dimensions
Mechanical outline and mounting dimensions

Confirm the dimension units, mounting interface and connector clearance before machining the installation plate.

Integrated drive architecture

Choose the control mode your axis needs.

SPBI42PO combines selectable current and microstep settings with three control modes. Review the drive configuration against the motor, controller and mechanical installation before integration.

  • 12–36 VDC supply range; 24 VDC typical
  • Eight current settings and four switch-selectable microstep settings
  • Pulse-and-direction, dual-pulse and I/O speed control
SPBI42PO integrated open loop stepper driver with finned housing
Application selection

Assess the driver against your motion requirements

Evaluate the electrical range and control modes for your machine. Check the mounting arrangement individually for each 20, 28, 35 or 42 mm motor configuration.

01

Pulse-command axes

Check pulse-and-direction or dual-pulse controller signals and the maximum operating pulse frequency.

02

Preset-speed operation

Assess the four I/O speed presets against the required operating speed and control sequence.

03

Motor-current matching

Match the motor winding and current requirement to the drive’s 0.2–2 A output-current range.

04

Integrated installation

Review the mounting interface, connector access and available space around the driver and motor.

System integration

Confirm the electrical and mechanical fit

Share the motor data, selected control mode and installation requirements so our engineering team can review the proposed driver configuration.

Power supply12–36 VDC; 24 VDC typical
Output-current range0.2–2 A
Pulse inputUp to 200 kHz
Control modesPulse & direction / Dual pulse / I/O speed
Logic input5–24 V; 7–10 mA

Discuss your stepper-drive requirement with our engineers.

Send the motor model, current requirement, supply voltage, control mode and installation constraints for selection support.

Request consultation →

Contact us

Would you like to learn more about our solutions?
We would be happy to advise you—personally, competently, and tailored to your requirements.

Perfection in a new dimension

SPBI42PO Integrated Open-Loop Stepper Driver
SPBI42PO is an integrated open loop stepper driver with a 12–36 VDC supply range and 0.2–2 A output-current range. It supports pulse-and-direction, dual-pulse and I/O speed control for 20, 28, 35 and 42 mm motor applications, subject to electrical and mounting checks.

Further Information

csm walpha vorzugsbaureihen slider 720x490 eaea48abcd

Short delivery times available for selected product configurations.

csm tp plus image 125ef722c4

The TP+ HIGH TORQUE enables maximum torque density and maximum torsional rigidity—ideal for demanding applications with dynamic load changes and high positioning accuracy.

csm tp plus mf flansch korrosion liegend slider 78e8934f42

alpha Advanced Line gearboxes with increased durability and food-grade lubrication available.

csm tp plus ma rmw ritzel zahnstange slider f4c7f6da40

The TP+ for coordinated pinion-rack systems for medium to high requirements. Typical areas of application in wood, plastic, and composite processing, in machining centers, or in automation.

csm cynapse produkseite element slider 08849abb4c

With cynapse® and smart services, you can unleash the full potential of your drive system: sensor data is processed, visualized, and analyzed intelligently. Find out how the combination of gearboxes with cynapse® and our Smart Services can make your digital production faster, safer, and more efficient.

Related products