Isolated RS485 interface
Standard Modbus RTU communication provides a serial interface for controller integration. Confirm the required communication settings and register definitions before commissioning.
High torsional rigidity and constant torsional backlash over the entire gearbox service life ensure consistently high performance
High torque density thanks to high performance and short design
Highest quality standards for a long service life and extended maintenance intervals
The SPXSA28E RS485 closed loop stepper driver combines a 32-bit ARM processor with an isolated RS485 interface supporting standard Modbus RTU. Select speed, position, multi-segment position or homing operation to match the equipment sequence.
Standard Modbus RTU communication provides a serial interface for controller integration. Confirm the required communication settings and register definitions before commissioning.
Speed, position, multi-segment position and homing modes support different motion sequences. Choose the operating mode according to the controller and application requirements.
Eleven optically isolated programmable inputs accept external control signals for driver enable, start/stop and limit functions. Match the signal assignments to the equipment sequence.
Select an AC or DC supply within the specified range and verify the motor electrical, feedback and installation requirements. The listed 20 / 28 frame designations alone do not establish compatibility.
| Parameter | Minimum | Typical | Maximum |
|---|---|---|---|
| Output current (A) | 0.7 | — | 2.0 |
| AC supply voltage (VAC) | 20 | — | 50 |
| DC supply voltage (VDC) | 24 | 36 | 70 |
| Control-signal input current (mA) | 7 | 10 | 16 |
| Insulation resistance (MΩ) | 50 | — | — |
| Function | Specification |
|---|---|
| Drive architecture | RS485 closed-loop stepper driver |
| Listed motor frames | 20 / 28; verify motor electrical, feedback and installation requirements |
| Processor | 32-bit ARM |
| Communication interface | Isolated RS485 |
| Communication protocol | Standard Modbus RTU |
| Operating modes | Speed / position / multi-segment position / homing |
| Programmable inputs | 11 optically isolated inputs |
| Listed input functions | Driver enable, start/stop and limit functions |
| Protection functions | Overcurrent, overvoltage, undervoltage, phase loss and excessive deviation |
Confirm the selected power supply, motor current and control-signal requirements before wiring. Drive protection functions do not replace the safeguards required by the complete machine.
Confirm dimension units, mounting-hole positions and connector clearance before machining the installation plate.
SPXSA28E combines isolated RS485 communication with a 32-bit ARM processor and four motion modes. Select a 24–70 VDC or 20–50 VAC supply, match the motor-current requirements, and allocate the 11 programmable inputs before commissioning.

Review the motion sequence, Modbus RTU controller configuration and external signals together. Confirm motor matching and the required stopping behavior before equipment commissioning.
Evaluate speed mode for motion sequences requiring a commanded speed. Confirm the controller settings and motor requirements.
Use position-mode selection to plan commanded movements. Verify the motion limits and feedback configuration for the chosen motor.
Assess multi-segment position mode against the required sequence. Confirm the available segment configuration and triggering method during selection.
Review homing mode and the external signal assignments for axis referencing. Confirm the required sensors and stopping conditions.
Share the motor model, winding and feedback information, selected supply, Modbus RTU controller, motion mode and signal assignments so our engineering team can review the configuration.
Send the motor model, supply voltage, controller, required motion mode and signal requirements for selection support.
Review additional components for your motion system.
Would you like to learn more about our solutions?
We would be happy to advise you—personally, competently, and tailored to your requirements.
Short delivery times available for selected product configurations.
The TP+ HIGH TORQUE enables maximum torque density and maximum torsional rigidity—ideal for demanding applications with dynamic load changes and high positioning accuracy.
alpha Advanced Line gearboxes with increased durability and food-grade lubrication available.
The TP+ for coordinated pinion-rack systems for medium to high requirements. Typical areas of application in wood, plastic, and composite processing, in machining centers, or in automation.
With cynapse® and smart services, you can unleash the full potential of your drive system: sensor data is processed, visualized, and analyzed intelligently. Find out how the combination of gearboxes with cynapse® and our Smart Services can make your digital production faster, safer, and more efficient.